Choose ProShield

Why replace what we can easily restore with a system that is better than your roof was when it was new?

ProShield Advantages

Aside from the significant savings - there are many other advantages of the ProShield system.

• Economical
• Environmentally Friendly
• Lifetime Renewable
• Dual Membrane Technology
• Built in Wear Indicator

• Zero VOC
• Seamless
• Fully Bonded
• Zero Waste
• Easy To Apply

• Extreme Durability
• High Elongation
• Ease of Maintenance
• Real Leak Free Warranty
• Certified Installers

• 3rd Party Post Completion Inspection
• Chemical Resistant
• Elimination of Common Failure Points
• Cold Weather Flexibility

• Economical
• Environmentally Friendly
• Lifetime Renewable
• Dual Membrane Technology
• Built in Wear Indicator
• Zero VOC
• Seamless
• Fully Bonded
• Zero Waste
• Easy To Apply
• Extreme Durability
• High Elongation
• Ease of Maintenance
• Real Leak Free Warranty
• Certified Installers
• 3rd Party Post Completion Inspection
• Chemical Resistant
• Elimination of Common Failure Points
• Cold Weather Flexibility

You Can Get a Tax Deduction!

Depending on location and composition of the existing roof, removal and disposal is $2 – $4 per square foot.
New roof installation is between $8- $14 per square foot dependant on system

ProShield Roof Restoration cost range from $4 – $8 per square foot.
(Price will vary dependant on: size, existing roof material, condition of the roof system and rehabilitation/construction required).

ProShield Restoration System is a repair/maintenance service and as such the cost of this repair is considered a current expense and can be deducted in the year the work was performed.

With the current CRA 2018 Corporate Tax Rate of 26.5% this could provide substantial tax savings compared to the Capital Cost Depreciation of 4 – 5%.
*confirm this with your accountant or finance department.

Why replace when you can restore?

9

Save Time and Hassle

Save the time and hassle of a full tear off and have one of our dealers install the ProShield dual membrane system on your roof today! What you end up with is a thicker, tougher longer lasting roofing system, while also saving approximately 40% of the cost of replacement.

9

No Weak Points or Seams

Our Asphalt emulsion base is fully fabric reinforced using a high quality polyester fabric. This aids a reinforcement to the emulsion similar to rebar in concrete providing a strong base layer for us to build the base membrane on top of. Once that initial layer of emulsion and fabric is installed we apply an additional 40-60 mil of emulsion on top. The emulsion then cures to form an impervious 80-100 mil thick barrier with no weak points or seams.

9

Urethane Top Coat is Tougher!

The ProShield roofing system gives you what no other coating system on the market today gives you. Our dual membrane system provides a total of 90-120 mil of waterproofing which is double the average sheet product used today by traditional roofing companies. Our Urethane top coat is tougher and has better chemical resistance as well.

9

Long Term Performance Over Increased Profits

Polyurethane Top Coat Membrane – typically installed in two 15 mil coats in grey/tan or tan/gray this water based PU coating provides us a built in wear indicator as well as chemical resistance and durability. We don’t cheap out like other companies and use Acrylics or Silicon coatings. We only use what is best for the application here in Western Canada. PU coatings can handle the ponding water and freeze thaw cycles better than the other options on the market. We choose long term performance over increased profits.

Why do we use a double membrane system?

Because built in redundancy is just a better option. Our base membrane is there to act as the backup to keep your building leak free. It is totally protected by the top coat PU membrane and because the asphalt emulsion is never subjected to elements that breakdown any waterproofing membrane and allows the asphalt to remain perfectly intact for decades. Your roof is never at risk of leaking as long as the PU top coat membrane is maintained over time. By renewing the sacrificial protective layer with an economical thin film recoat when needed you maintain this layer of protection and extend the life of the roof system indefinitely.

Contact Us

4 + 12 =

ProShield Coating Technologies Inc.

778-251-6314